FSA-90000 Smoke Alarm Remote Troubleshooting Guide
FSA-90000
FSA-90000 SMOKE ALARM REMOTE CONTROLLER TROUBLESHOOTING GUIDE
Troubleshooting guide and other resources for the FSA-90000 smoke alarm remote controller from MATelec Australia
FACTORY RESETTING
FACTORY RESETTING FSA-90000 SMOKE ALARM REMOTE
To restore your FSA-90000 Smoke Alarm Remote to its factory settings, follow the steps.
REMOVE BATTERY
Remove the battery from the back of the remote.
PRESS NET BUTTON
Hold the NET button down for 15 seconds then release.
LED ILLUMINATES
The red LED will illuminate for 3 seconds.
RELEASE TEST BUTTON
When the red LED turns off, release the Test button.
REMOTE TESTING
HOW TO TEST YOUR SMOKE ALARMS USING THE FSA-90000 REMOTE
PRESS TEST
Press the TEST button on the remote.
LED FLASH
The red LED on the remote will flash three times.
ALARMS SOUND
After the third flash, all connected alarms will sound for around 25 seconds, confirming the test has been activated.
TEST COMPLETE
Once the test finishes, the red LED on each alarm will flash once every second for three minutes to indicate a successful test.
VIDEO
Using the FSA-90000 Remote with FSA-30000, DET-SMK/RF/AC/1 and /10 Smoke Alarms
Using the MATelec FSA-90000 Remote with FSA-30000, DET-SMK/RF/AC/1 and /10 Smoke Alarms
HUSHING & RESETTING
HOW TO HUSH AND IDENTIFY TRIGGERED ALARMS USING THE FSA-90000 REMOTE
PRESS HUSH
If a false alarm occurs, press the Hush button on the remote. This will silence the triggered alarm for 10 minutes.
LOCATE TRIGGERED ALARM
If you have multiple interconnected alarms, you can identify which one triggered by pressing the Locate button on the remote.
TRIGGERED ALARM IDENTIFICATION
The red LED on the triggered alarm will flash and sound enabling easy identification.
VIDEO
Using the FSA-90000 Remote with FSA-30000, DET-SMK/RF/AC/1 and /10 Smoke Alarms
Using the MATelec FSA-90000 Remote with FSA-30000, DET-SMK/RF/AC/1 and /10 Smoke Alarms
SOS FUNCTION
USING THE SOS FUNCTION ON YOUR FSA-90000 REMOTE
The SOS function can be used during non-fire emergencies to quickly alert others in the home.
PRESS SOS
Press the SOS button to activate all interconnected alarms.
PRESS LOCATE
To turn off SOS mode, press the Locate button and wait three seconds.
VIDEO
Using the FSA-90000 Remote with FSA-30000, DET-SMK/RF/AC/1 and /10 Smoke Alarms
Using the MATelec FSA-90000 Remote with FSA-30000, DET-SMK/RF/AC/1 and /10 Smoke Alarms
PAIRING INSTRUCTIONS
HOW TO PAIR THE FSA-90000 REMOTE TO SMOKE ALARMS
The SOS function can be used during non-fire emergencies to quickly alert others in the home.
VIDEO
Pairing FSA-90000 Remote with DET-SMK/RF/AC/1 and /10
Pairing the MATelec FSA-90000 Wireless Remote with MATelec DET-SMK/RF/AC/1 and /10 Smoke Alarms
VIDEO
Pairing FSA-90000 Remote with FSA-30000 and FSA-60000
Pairing the MATelec FSA-90000 Wireless Remote with MATelec FSA-30000 and FSA-60000 Smoke Alarms
VIDEO
Pairing FSA-90000 Remote as Master Controller
Pairing the MATelec FSA-90000 Remote as the Master Controller in a network of MATelec Smoke Alarms, rather than the smoke alarm itself. This means that it is a bit easier to add more alarms to the network in future.
Related Resources
SUPPORT MATERIAL
RELATED RESOURCES
Filters
0resources
Loading…
